Advertisement
-03-
4. INSTALLING
a. Unpack the screen carefully. be sure the screen is in good condition,
check all the accessories are packed inside the carton.
b. Check the voltage and frequency marked on the screen is in
accordance
with
the local power supply. It is suggested only to use
the screens indoor under normal temperature and humidity.
c. Refer
to
the below
and fix the screen to
wall or to the ceiling.
fix the screen to the wall.
fix the screen to the ceiling.
d.Plug in the power supply. Press the down button of the manual switch
or the transmitter ,the screen will go down
smoothly. Press
the stop button
when the screen goes down to the expected position,otherwise the
screen will stop at the lower limited position automatically.
#
#
~
rl~~~~~~~~jdi
e.Press the up button of the manu::itch
J.1~~~~~~~"",r
or the transmitter
I
the screen
will
go
I
t
up Smoothly. Press the stop button when
t
the screen goes up
to
the expected
"F~~~~~~~jdi
position, otherwise the screen will roll
me
back
to
the housing.
The screen won't be used for a long time
when you cut
off the
power supply.
Don not pull the control wires
to
avoid
disconnection and it's dangerous.
f.
Moving Parts of the drive must be installed higher than 2,5 mm
above the floor or other level that could provide access to it.
Advertisement
