Other Features; Set Alarm Timer; Set Sleep Timer; Listen To External Audio Device - Philips MCM1120 User Manual

6 Other features

Set alarm timer

This unit can be used as an alarm clock. You
can select DISC, USB, or FM TUNER as alarm
source.
Note
•
Make sure that you have set the time correctly.
1
In standby mode, press and hold TIMER
until [TIMER SET](timer set) scrolls on the
display.
» [SELECT SOURCE] (select source)
scrolls on the screen.
2
Press SOURCE repeatedly to select a
source: DISC, USB, or FM TUNER.
3
Press TIMER to confirm.
» The hour digits are displayed and begin
to blink.
4
Press / repeatedly to set hour, then
press TIMER again to confirm.
» The minute digits are displayed and
begin to blink.
5
Press / to set minute, then press
TIMER to confirm.
is displayed.
»
Activate/deactivate alarm timer
In standby mode, press TIMER repeatedly to
activate or deactivate timer.
» If timer is activated,
Note
•
Alarm timer is not available in MP3 LINK mode.
•
If DISC/USB source is selected, yet no disc is placed or
no USB is connected, the system switches to the tuner
source automatically.
EN
14
is displayed.

Set sleep timer

When the unit is turned on, press SLEEP
repeatedly to select a time period (in minutes).
» When sleep timer is activated,
displayed.
» To deactivate sleep timer, press SLEEP again
until disappears.
Listen to external audio
device
You can listen to an external audio device such
as MP3 player through this unit.
1
Connect the audio device.
• For audio device with headphone
sockets:
Connect MP3 Link cable to the MP3-
LINK socket and to the headphone
socket on the audio device.
2
Select MP3-LINK source.
3
Play the device.

Listen through headphone

Plug a headphone into the
is
socket on the unit.