Listen To Tape - Philips MCM1120 User Manual

4
Press / to select a track number, then
press PROG to confirm.
5
Repeat steps 3 and 4 to program more
tracks.
6
Press to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
» To erase the program, press
play is stopped.

Listen to tape

Note
•
When you play or record a tape, the sound source
cannot be changed.
•
To record, use only "Normal" (IEC type I) tapes on
which the write-protect notches (tabs) are not broken.
Play a tape
1
Press TAPE to select the tape source, and
pull to open the tape button cover on the
front.
2
Press to open the tape door.
3
Load a tape with the open side downward
and the full spool to the left, and close the
tape door.
4
Close the tape door.
5
Press to start play.
• To pause or resume play, press .
• To stop the play, press .
• To fast rewind or wind the tape, press
/ .
when
Record from CD to tape
1
2
3
4
Press CD to select the CD source.
Load a disc.
• To record from the beginning of the
disc, stop disc play from the beginning.
• To record a section of the disc, stop
disc play from the beginning of the
section.
Pull to open the tape button cover on the
front.
Press to open the tape door.
EN
11