Page 1
Installation ● Operation Manual Condensate Neutralizer Kit Item Number ECHNK01 Service Information Center: Call us first if you have any questions with this product. We can help you with questions about assembly and operation or if there are any damaged or missing parts when you unpack this part from the shipping box.
Page 2
The Eternal Condensate Neutralizer Kit increases pH (reduces acidity) The Eternal Condensate Neutralizer Kit is designed to raise the pH level of the condensate discharged by the Eternal Water Heater. Each change of 1.0 in pH is a 10-times reduction or (increase) in concentration. The pH of condensate is increased by approximately 1.0 to 3.0 higher after passing through the Condensate Neutralizer Kit.
Page 3
Parts List and Diagram Left Description PVC Tubing filled with 1/2'' and 3/4'' Aggregate Calcium Carbonate Channel Strut Mounts Galvanized Strut Clamps, Bolts, and Nuts Condensate Outlet Hose Barb Fitting Condensate Inlet Hose Barb Fitting Plugged-Alternate Location for Condensate Inlet Hose Barb Fitting Note: Hose Barb Fittings to 30'.
Page 4
Installation and Maintenance Intake Air Exhaust Relief Valve Discharge Line Eternal Condensate Neutralizer Condensate Hose Drain Tap with mesh filter Adapter Sediment Trap (These diagrams are for reference as basic guides. Each installation should be engineered properly and compliant to Local, State, and Federal Codes.) Installation Instructions: Securely fasten the two bases to floor or wall.
Page 5
Installation and Maintenance WARNING ● Apply to flue gas condensing water heater and breeching condensate drains only. ● DO NOT exhaust flue gases through the Neutralizer Kit. It is not rated for water heater flue gases. Operating the Neutralizer Kit as an exhaust vent can cause injury or death from carbon monoxide. ●...
Need help?
Do you have a question about the ECHNK01 and is the answer not in the manual?
Questions and answers