Temperature Controls; F/C; Door Alarm - GE Bottom-Freezer Built-In Refrigerators Owner's Manual

Temperature
controls
The temperature display shows the actual
temperature of the freezer and fresh food
compartments. The actual temperature may
vary slightly from the set temperature based
on factors such as frequency of door opening,
amount of food, defrost cycling and room
temperature.
To turn off the cooling system in both the
freezer and fresh food compartments, press
either + pad until both displays show OFF.
To turn the cooling system on, press either –
pad. The preset temperatures of 0°F and 37°F
will appear in the display.
Changing To change the temperature display between
Fahrenheit and Celsius, press the Temp
display
Display °C/°F.
temperatures
from °F to °C
Door To turn the Door Alarm feature on, press
the pad once. The ACTIVE light will come on.
alarm
To turn it off, press the pad again.
8
Preset Settings
Allow 24 hours to reach these preset temperatures.
Operating Instructions
Bottom Freezer Refrigerator
To check the current temperature setting for
the fresh food or freezer compartment, press
the + or – pad once. After 5 seconds, the
display will return to the actual temperature.
To change the temperature settings, press the
+ or – pads. Allow 24 hours for the refrigerator
to reach the temperature you have set.
Temperature Ranges
Low
34°F
Fresh Food
1°C
–6°F
Freezer
–21°C
NOTE: Setting the controls to OFF stops
cooling, but does not shut off electrical power
to the refrigerator.
When the DOOR ALARM
is active, the alarm will flash
and beep if you keep the
door open for more than
2 minutes.
High
45°F
7°C
+6°F
–14°C