RocketFish RF-WSP313 Quick Setup Manual

Bluetooth Indoor/Outdoor Speaker | RF-WSP313
Package contents
Speaker AC power adapter 6 ft. 3.5 mm User Guide Quick Setup Guide
stereo audio cable
Features
• Weather resistant speaker – use inside or outside
• Built-in rechargeable battery
• Versatile design – place horizontally or vertically depending on your need
• Wirelessly stream music from your iPhone, iPad, or other Bluetooth device
• aptX® audio decoding – highest Bluetooth stereo audio quality possible
Setting up your wireless speaker
Connecting the AC power adapter
To connect the wireless speaker to an AC power outlet
• Plug the AC power adapter into a power outlet, then plug it into the DC IN jack on your wireless
speaker.
Charging the built-in battery
This wireless speaker has a built-in Lithium Ion battery to give you battery playback when you can't
use the AC adapter. When the AC adapter is plugged in, the system charges. While charging, the
battery indicator lights amber. When fully charged, it turns green. After five minutes, if you don't turn
on the speaker, the indicator turns off and the speaker turns off.
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
Front view
# Feature Function
1 (On/Off/ Press to turn your speaker on or off.
Pairing) button Press and hold for two seconds to put the speaker into
Bluetooth pairing mode.
2 Power/Pairing Indicates the status of the speaker.
indicator • Off - Speaker is off
• Red (slow blinking) - Speaker is on (after
turning on the speaker it will be in this state for
approximately four seconds).
• Blue (slow blinking) - Speaker is on and idle. There
is no connection to a sound source.
• Blue (fast blinking) - Speaker is in Bluetooth
pairing mode.
Back view
• Blue (steady) - Speaker is connected to a sound
source.
• Blue (blink once) - Volume +/- button is
pressed.
3 Battery Indicates the status of the built-in battery.
indicator When the speaker is plugged into the AC adapter:
• Green - Battery is fully charged. Note the indicator
will turn off after five minutes if the speaker is off.
The indicator will also turn off after five minutes if
the speaker is on but not connected to a sound
source.
• Amber - Battery is charging.
When the speaker is not plugged into the AC adapter:
• Red - Battery power is low.
4 Volume + Press to increase the volume of the speaker.
button
5 Volume – Press to decrease the volume of the speaker.
button
6 Bass on/off Press to turn the bass enhancement feature on or off.
button
7 AUX IN jack Connect an external audio device to this jack.
8 DC IN jack Connect the AC power adapter to this jack to power
the speaker and charge the battery.
Selecting a sound source
This system lets you listen to either AUX IN (wired) or Bluetooth (wireless) sound sources. The
speaker is in Bluetooth mode unless an audio cable is connected.
If you insert an audio cable while in Bluetooth mode, the wireless speaker automatically switches
to AUX IN mode.
To resume the Bluetooth playback, remove the audio cable from the AUX IN jack, and press the
Play button on your Bluetooth device.
Using your Bluetooth Indoor/Outdoor speaker
Pairing your devices using Bluetooth
Before you can use your wireless speaker with a Bluetooth device, you need to pair your device to
the wireless speaker.
To pair your devices using Bluetooth:
1 Make sure that a compatible Bluetooth device (like a music player or phone) is turned on and
within 33 feet (10 meters) of your Bluetooth speaker.
2 Remove any cable from the AUX IN jack (if an audio cable is connected, Bluetooth mode is
automatically cancelled).
3 Turn on your Bluetooth speaker by pressing . The Power/Pairing indicator blinks on and off
slowly.
4 Press and hold for two seconds to put the speaker into Bluetooth pairing mode. The
Power/Pairing indicator blinks on and off quickly.
5 Go to the Bluetooth manager by doing the following:
a. For iPad/iPhone/iPod touch:
i. From your iPad/iPhone/iPod touch home page, touch Settings.
ii. From Settings, touch General.
iii. From General, touch Bluetooth.
b. For Android Phone/Tablet:
i. From your smart phone/tablet home page, touch Settings.
ii. From the Settings menu, touch Wireless and networks.
iii. Touch to activate Bluetooth.
iv. Touch Bluetooth settings.
6 On the Bluetooth device, select Rocketfish RF-WSP313 from the list of found devices.
7 On the Bluetooth device, enter 0000 as the PIN, if prompted. The LED indicator lights blue on
the wireless speaker.
8 If you are pairing with a computer, make sure that your Bluetooth speaker is selected as the
computer's default playback device. See the computer's documentation for instructions.