Listen To Radio; Program Radio Stations; Tune To A Radio Station; Select A Preset Radio Station - Philips FWT6600 User Manual

8 Listen to radio

Tune to a radio station

1
Press TUNER repeatedly to select FM or
AM.
2
Press / or press and hold
more than 2 seconds.
» [SEARCH] (search) is displayed.
» The radio tunes to a station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
repeatedly until you find optimal
reception.

Program radio stations

manually
You can program a maximum of 30 FM and 10
AM preset radio stations.
1
Tune to a radio station.
2
Press PROG to activate program mode.
» [PROG] (program) and a position
number are displayed.
3
Press ALB/PRESET+/- to allocate a
number to this radio station, then press
PROG to confirm.
4
Repeat the above steps to program other
stations.
Tip
•
To overwrite a programmed station, store another
station in its place.
Program radio stations
automatically
In the tuner mode, press and hold PROG for
more than 2 seconds to activate automatic
program mode.
» [AUTO] (auto) is displayed.
» The unit automatically stores radio
/ for
» After all available radio stations are

Select a preset radio station

/
In tuner mode, press ALB/PRESET+/- to select
a preset number.
•
Position the antenna as far as possible from TV, VCR or
other radiation source.
•
For optimal reception, fully extend and adjust the
position of the antenna.

Change AM tuning grid

In some countries, the AM radio frequency step
between adjacent channels is 10 kHz (9 kHz in
some areas).
1
Select the tuner source.
2
Press and hold
» The frequency step is changed to 9
» All preset stations are erased and re-
stations with sufficient signal strength.
stored, the first stored radio station is
broadcast automatically.
Tip
for more than 5 seconds.
kHz or 10 kHz.
programmed in AM mode.
EN 17