Table of Contents
Advertisement
3 Get started
Caution
•
Use of controls or adjustments or performance of
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install remote control battery
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of product damage! When the remote control is
not used for long periods, remove the battery.
For first-time use:
•
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.
Connect power
Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the head of the AC power cord.
•
Risk of electric shock! When you unplug the power
cord, always pull the plug from the socket. Never pull
the cord.
Note
•
Before you connect the AC power cord, make sure that
you have completed all the other connections.
•
Connect the AC power cord to
• the ~ AC IN socket on this unit.
• the wall power socket.
EN
9
Advertisement
Table of Contents
