Electrolux EWF 12680 W User Manual page 14

14 electrolux use
Alarm codes
In the event of operating problems,
some alarm codes can be displayed, for
example E20 (see paragraph "Something
not working").
End of programme
When the programme has finished a
flashing zero is displayed, the
icon desappears and the door can be
opened.
Heating phase
During the washing cycle the display
shows the temperature icon animated to
indicate that the appliance has started
the heating phase of the water in the
tub.
Select the Start/Pause
To start the selected programme, press
the Start/Pause button; the green pilot
light stops flashing.
The "door"
display to indicate that the appliance
starts operating and the door is locked.
To interrupt a programme which is
(Door)
running, depress the Start/Pause
button: the green pilot light starts to
flash.
To restart the programme from the point
at which it was interrupted, press the
Start/Pause button again.
If you have chosen a delayed start, the
machine will begin the countdown.
If an incorrect option is selected, an
integrated red pilot light of the "Start/
Pause" button flashes 3 times the
message Err is displayed for about 2
seconds. Three acoustic signals sound.
icon appears on the