Video Resolution - GE SymVeo SV-XP1 User Manual

Camera MPEG Settings
This page provides settings that have to do with MPEG quality
and speed. Three quality settings are available; standard, medium,
and high. The MPEG preset settings control the video latency
(delay). Selecting the low latency preset can increase the speed of
the video, but the quality will suffer. Field rate and resolution
settings are also available. Up to 15 custom configurations can
also be setup and saved on this page. Audio can also be turned on
of off by camera.You can also change the camera title here.
SymVeo allows a number of different ways to control bandwidth,
including adjustment of resolution, compression (image quality),
and enabling or disabling audio. Each adjustable setting affects
not only bandwidth, but latency as well. In addition to these
settings, this menu is also used to switch between NTSC and PAL
(default is NTSC).

Video Resolution

Video Resolution can be set between five different resolutions in
each of NTSC and PAL. These resolutions are:
Table 1. SymVeo video resolutions
NTSC resolution
D1
4CIF
VGA
CIF
QCIF
NTSC pixels
720 x 480
704 x 480
640 x 480
352 x 240
176 x 120
PAL resolution
D1
4CIF
VGA
CIF
QCIF
PAL pixels
720 x 576
704 x 576
640 x 480
352 x 288
176 x 144
35