Webpage Access - GE SymVeo SV-XP1 User Manual

Webpage Access

The SymVeo IP Camera has an integrated web server interface.
This interface allows you to configure and control the SymVeo,
including viewing live video, adjusting video parameters, and
upgrading the firmware over the IP network.
To access the web interface:
1. Launch Internet Explorer (version 5.5 or later) on any
local Internet connected PC or laptop.
2. Type in the unit's IP address (default 3.112.55.167) in the
address field and press enter. The Enter Network
Password box should appear.
3. Enter the correct username and password in their
respective fields (the default username and password are
both admin). Click the OK button.
The IP Camera's home page window (Figure 19) should appear.
Figure 19. Home page
29