Rear Panel Connections; Monitor Out - Panasonic TX-76PW05A Operating Instructions Manual

Connecting Equipment to the TV

Rear Panel Connections

When using a VCR with the television always connect the Aerial to the VCR and connect an RF Cable (not
supplied) between the VCR RF-Out and the television RF-In.
You can watch videos by either tuning the television to the
VCR (see page 30) or by connecting the VCR to the rear
AV terminals.
Note: When connecting a mono VCR through the RF-In, please switch the TV to mono.

Monitor Out

The Monitor Out terminals reproduce the signals currently on the television screen. The on-screen signals
could be a television programme or signals connected to one of the AV inputs.
The Monitor Out facility can be used to allow one video source (videotape, video disc etc.) to be connected
to more than one television. Connect the Monitor out from this television to the AV Input of the second
television.
If a video recorder is connected to the Monitor Out and video sources (VCR, video disc, camera etc.) are
connected to one or more of the AV inputs, the television becomes a visual display for tape editing or
copying. Unauthorised recording of material from Television Broadcasts or from other video
and/or audio sources may contravene copyright laws.
The Monitor Out Audio can also be connected to a stereo amplifier or other hi-fi equipment.
36
VIDEO
L
AUDIO
R
NOTE:
Never connect the same video recorder or other device
to both the VIDEO IN and MONITOR OUT terminals of
this television as this could cause incorrect operation.
RF Cable
TX-76PW10A
TX-76PW05A
MONITOR
OUT
VIDEO
L
AUDIO
R