Garmin zumo 200 Quick Start Manual page 6

Panhead screws
Attach the Base Plate to the zūmo
Mount
1. Thread the M4 × 40 mm panhead screws
through the washers, cradle, spacers, and
base plate.
2. Tighten the nuts to secure the base plate.
Attach the Base Plate to the Handlebar
Base
1. Align the ball of the handlebar base and the
ball of the base plate with the double-socket
arm.
2. Tighten the knob slightly.
3. Adjust for better viewing and operation.
4. Tighten the knob to secure the mount.

Washers
Cradle
Base plate
Spacers
Cradle
Base plate
Handlebar base
zūmo 0 Quick Start Manual
Nuts
Double-socket arm
Knob