Table of Contents
Advertisement
5-4
warning and click Yes to continue the installation.
7. When the driver is copied on the hard drive, click Finish.
8. You will be prompted to restart the computer. Select Yes.
5.2.3.
Changing SCSI Boot Controllers in Windows 2000
1. With the existing controller still installed, install the Ultra320 controller
into your system. Do not attach any devices to it at this time.
2. Boot up the operating system. Install the driver for the Adaptec Ultra320
Adapter.
3. Shut down Windows 2000. Turn off your system if necessary.
4. Switch the bootable hard drive from the old SCSI controller to the
Ultra320 controller and boot up your computer.
SI-2P+
Chapter 5
Advertisement
Table of Contents
