Chapter 4. Scsi Utility - Abit SI-2P+ User Manual

SCSI Utility 4-1
Chapter 4. SCSI Utility
To enter the SCSI configuring menu, reboot the system, press <Ctrl> and <A> key
when the following message appears:
Press <Ctrl> <A> for SCSISelect(TM) Utility
The following screen appears. Select the channel you want to enter the SCSI
configuring menu.
Move the <Up> or <Down> arrow key to select the channel your SCSI devices
attached, and then press <Enter> key to enter. Press <Esc> key will exit this menu.
The following screen appears. Here in this option, you can configure the SCSI
controller, or run the SCSI Disk Utilities.
Move the <Up> or <Down> arrow key to select the option you want and press
<Enter> key to enter. Press <Esc> key will exit this menu.
User's Manual