Table of Contents
Advertisement
BIOS Setup
3-13
3.2.4.
Power Management Setup
Soft-Off by PWR-BTTN
This item selects the method of powering off your system:
[Hold 4 Sec.]: Pushing the power button for more than 4 seconds will power off the
system. This will prevent the system from powering off in case you accidentally hit or
pushed the power button.
[Instant-Off]: Pressing and then releasing the power button at once will immediately
power off the system.
Wake-Up by PCI card/LAN
When set to [Enabled], access to the onboard LAN or a PCI card such as a modem or
LAN card will cause the system to wake up. The PCI card must support the wake up
function.
Resume by Alarm
When set to [Enabled], you can set the date and time you would like the Soft-Off PC
to power-on in the "Date (of Month) Alarm" and "Time (hh:mm:ss) Alarm" items.
However, if the system is being accessed by incoming calls or the network (Resume
On Ring/LAN) prior to the date and time set in these items, the system will give
priority to the incoming calls or network instead.
User's Manual
Advertisement
Table of Contents
