Pioneer LX03BD Operating Instructions Manual page 109

Advanced settings
Setting
DVD 16:9 Video Out
NTSC on PAL TV
Many recent PAL TVs support the input of NTSC signals. Therefore, this can be set to Off. Check also the
operating instructions of your TV.
Still Picture
Audio Out
Dolby Digital Out
* Only valid for digital
audio outputs.
DTS Out
* Only valid for digital
audio outputs.
Options Explanation
Letter Box
16:9 pictures are displayed with black bands at the top and
bottom when watching on a 4:3 screen.
Pan & Scan The picture is displayed over the entire screen, with the left
and right sides of the 16:9 picture cut off. Select this to watch
4:3 pictures over the entire screen.
On
Select this when connected to the PAL-only TV. When playing
the materials with the frame/field rate other than 50 Hz, the
PAL-only TV can display correctly.
Off Select this when multi-system (NTSC-compatible) TV.
Field This eliminates instability of the picture when playback is
paused.
Frame This makes pictures clear when playback is paused, but
instability may be observed.
Auto Field or Frame is selected automatically according to the
disc or file being played.
Dolby Digital 1 Dolby Digital audio signals are output. With BD-ROMs, the
secondary audio and interactive audio are mixed for output.
Dolby Digital 2 Dolby Digital audio signals are output. With BD-ROMs, the
signals are output without mixing the secondary audio and
interactive audio signals.
Dolby Digital 
Select this when the connected AV receiver or amplifier, etc.,
PCM is not compatible with Dolby Digital audio signals. The Dolby
Digital audio signals are converted into linear PCM audio
signals for output.
DTS 1 DTS Digital Surround audio signals are output. With BD-
ROMs, the secondary audio and interactive audio are mixed
for output.
DTS 2 DTS Digital Surround audio signals are output. With BD-
ROMs, the signals are output without mixing the secondary
audio and interactive audio signals.
DTS  PCM
Select this when the connected AV receiver or amplifier, etc.,
is not compatible with DTS Digital Surround audio signals.
The DTS Digital Surround audio signals are converted into
linear PCM audio signals for output.
06
109
En