Front And Back Panels; Front Panel; Back Panel - Akai AHC1000 Operator's Manual

Front Panel Functions
1. POWER
Before plugging the power cord into the AC
outlet, check to make sure all of the connections
have been properly completed. When they have
been, carefully plug power cord into outlet.
Press the POWER button on the front panel
to power the unit.
When the unit is initially powered, a brief surge
of electricity may cause interference with other
electronic equipment on the same circuit. If this
occurs, connect the unit to an outlet on a
different circuit.
2 . OPEN/CLOSE
Use this button to open and close the disc tray
while in DVD mode.
3. PLAY/PAUSE /AUTO
6
Use this button to begin play/pause function
while in DVD mode.
When in the tuner mode, you may press this
button for automatic search.
Back Panel Functions
1. ANTENNA
Connect the provided indoor FM and
AM loop antennas.
2. AUX IN
Connect an audio source to the DVD player
to utilize the speakers.
3. AUDIO OUT
Connect both the right and left channel line
outputs as well as subwoofer output.
4. VIDEO OUT
Connect to a composite input of a TV.
5. S-VIDEO OUT
Connect to a S-Video input of a TV.
6. REAR
Connect the four terminals of the left and right
surround sound speakers.
10
~100-240V ~100-240V
50/60Hz 50/60Hz
FRONT AND
BACK PANELS
1
SR SL FR FL CEN SW
SPEAKERS IMPEDANCE 6
6 7 8
4 . PREV/DOWN
While in the DVD status, you may press this
button for previous track.
While in the tuner mode, you may press this bu-
tton for radio down search.
5. NEXT/UP
While in the DVD status, you may press this
button for next track .
While in the tuner mode, you may press this bu-
tton for radio up search.
6. INPUT SIGNAL SOURCE
Use this button to select the proper input signal
source.(Note: The selected input will correspond to
the selected input terminal on the rear panel.)
7. VOLUME
Use this button to control the unit's volume. It
controls all six channels simultaneously.
7. FRONT/MAIN
Connect the four terminals of the left and
right front or main speakers.
8. CENTER and SUBWOOFER
Connect the two terminals of the center
speakers.
Connect the two terminals of the subwoofer.
9. COAXIAL DIGITAL AUDIO OUTPUT
Connect to a coaxial AUDIO input of a digital
amplifier.
10. ~100-240V 50/60Hz
This unit comes with an AC power cord. Be
sure its prongs are dry before plugging it into an
electrical outlet. Take caution not to overextend
the cord or walk on it.
11. SCART OUTPUT
12. COMPONENT VIDEO OUT
Connect to a component input of a TV.
AUX IN
L L
COAXIAL
SCART OUTPUT
R R
11 9 2
2 3 4 6 7
5
DOWN
1
AUDIO OUT VIDEO OUT
P-SCAN
L L VIDEO
Cb/Pb Y
R R SW Cr/Pr S-VIDEO
3 12 5 4
VOLUME
UP