ASSEMBLY INSTRUCTIONS
NOTE: This log splitter was partially assembled at the factory. Refer to the drawings and parts list should it become
necessary to disassemble the unit for repair or replacement of parts
NOTE: This log splitter was partially assembled at the factory. Refer to the drawing and parts list should it become
necessary to disassemble the unit for repair or replacement of parts.
STEP 1: Remove all the components from the crate. Inspect each piece for shipping damage. If any part is damaged,
contact your dealer or delivering carrier.
STEP 2: Attach the two wheels (2) to the tank assembly (1) wheel spindles using the 3/4" light flat washers(3) ,3/4" NF
slotted nuts (4), 1/8" x 1-1/2" cotter pins (5) and the hub caps (6). These items are in the hardware package.
Tighten the slotted nuts and make sure the wheels rotate freely.
ITEM NO. PART NO. DESCRIPTION
QTY.
1
40160800 Tank Assembly
2
400312B0 Wheel Assembly
3
O/L
3/4" Light Flatwasher
4
17012000
3/4" Slotted Nut
5
O/L
1/8" x 1-1/2" Cotter Pin 2
6
40033200
Hub Cap
5
ITEM NO.
PART NO.
1
401643B0
2
40127500
3
40160800
4
400312B0
5
40127300
40115400
1
2
2
2
2
DESCRIPTION
QTY.
Beam Assembly
Beam Lock Assembly
Tank Assembly
Tire and Wheel
Tongue Assembly
Hardware Kit
1
1
1
2
1
1
Page 7