Assembly Instructions - Huskee 1032822 Owner's Manual

ASSEMBLY INSTRUCTIONS

NOTE: This log splitter was partially assembled at the factory. Refer to the drawing and parts list should it become
necessary to disassemble the unit for repair or replacement of parts.
STEP 1: Remove all the components from the shipping container.Inspect each piece for shipping damage. If any part is
damaged, contact your dealer or delivering carrier.
STEP 2: Attach the two wheels (2) to the tank assembly (1) wheel spindles using the 3/4" light flat washers(3), 3/4" NF
slotted nuts (4), 1/8" x 1-1/2" cotter pins (5) and the hub caps (6). These items are in the hardware package.
Tighten the slotted nuts and make sure the wheels rotate freely.
ITEM NO. PART NO. DESCRIPTION
1 401102R22 Tank Assembly
401102RC22 Tank Assembly (CA)
2 400312B0 Wheel Assembly
3 O/L 3/4" Light Flatwasher
4 17012000 3/4" Slotted Nut
5 O/L 1/8" x 1-1/2" Cotter Pin 2
6 40033200 Hub Cap
O/L- Obtain locally. Common fasteners available
through hardware and farm stores.
1 401613R0
2 401102R22
401102RC22
3 400312B0
4 40126300
40115500
QTY.
1
1
2
2
2
2
Beam Assembly
Tank/Engine Assembly
Tank/Engine Assembly (CA)
Tire and Wheel assembly
Tongue Assembly
Hardware Kit
1
1
1
2
1
1
Page 7