Resume Playback (Bookmark); Specifying Title; Specifying Track; Searching For The Part You Want To Play - Pioneer DVH-3150UB Operation Manual

Operating this unit
% To skip progressively backward or for-
ward, press CM BACK or CM SKIP.
Each time you press CM BACK or CM SKIP it
changes steps in the following order:
CM back
5 sec.—15 sec.—30 sec.—1.0 min.—2.0
min.—3.0 min.—0 sec.
CM skip
30 sec.—1.0 min.—1.5 min.—2.0 min.—3.0
min.—5.0 min.—10.0 min.—0 sec.
After displaying the selected option for two
seconds, reproduced image skips.
# If you do not operate the function within about
eight seconds, the display is automatically re-
turned.

Resume playback (Bookmark)

The Bookmark function lets you resume play-
back from a selected scene the next time the
disc is loaded.
! This function is available for DVD video.
% During playback, press 3/BOOKMARK
at the point you want to resume playback
next time.
The selected scene will be bookmarked so that
playback resumes from that point next time.
You can bookmark up to five discs. After that,
the oldest bookmark is replaced by the new
one.
# To clear the bookmark on a disc, press and
hold 3/BOOKMARK during playback.
Notes
! You can also perform this operation by press-
ing BOOKMARK on the remote control.
— To perform this function, set the remote
control to DVD mode.
! You can also bookmark a disc by pressing and
holding EJECT at the point you want to book-
mark. Next time you load the disc, playback
will resume from the bookmarked point. Note
that you can only bookmark one disc using
this method. To clear the bookmark on a disc,
press EJECT.

Specifying title

! This function is available for DVD.
! To perform this function, set the remote
control to DVD mode.
% Press 0 to 10 corresponding to a desired
title number when the disc is stopped.
Title number is displayed for eight seconds
and playback starts from the selected title.
! To select 3, press 3.
! To select 10, press 10 and 0 in that order.
! To select 23, press 10, 10 and 3 in that
order.

Specifying track

You can use the search function to specify a
track to search for a desired track.
! This function is available for Video CD.
! During playback of Video CDs featuring
PBC (playback control), this function can-
not be operated.
! To perform this function, set the remote
control to DVD mode.
% Press 0 to 10 corresponding to a desired
track number when the disc is stopped.
Track number is displayed for eight seconds
and playback starts from the selected track.
! To select 3, press 3.
! To select 10, press 10 and 0 in that order.
! To select 23, press 10, 10 and 3 in that
order.
Searching for the part you
want to play
You can use the search function to find the
part you want to play.
! Chapter search and track search are not
possible when disc playback has been
stopped.
! During playback of Video CDs featuring
PBC (playback control), this function can-
not be operated.
! To perform this function, set the remote
control to DVH mode.
Section
02
17
En