The Griddle - GE Monogram ZGU36L4D Owner's Manual

Stainless steel professional 36″ and 48″ gas cooktops
Hide thumbs Also See for Monogram ZGU36L4D:
Table of Contents

Advertisement

Before using the griddle for the first time,
Seasoning
it must be seasoned.

the griddle

If the griddle has not been used for a period
of time, it should be reseasoned.
To season the griddle:
1 Clean the griddle thoroughly with hot, soapy
2 Rinse with a mixture of 1 quart water and
3 Pour 1 teaspoon vegetable oil into the
Before starting to cook on the griddle,
Using the
be sure the drip tray and liners are in
griddle
place. Select the cooking temperature
and preheat for 15 minutes.
NOTE: When the griddle is properly
seasoned, it can be used without any
additional shortening. However,
shortening can be used for flavor.
water to remove any protective coating.
1 cup white vinegar. Dry thoroughly.
center of the griddle. Do not use corn oil as
it can get sticky. Rub the oil over the entire
surface of the griddle using a heavy cloth.
Using Your Cooktop
Stainless Steel Cooktop
4 Turn the control knob to a medium setting
(350°F). Turn the heat off when the oil
begins to smoke. Allow the griddle to cool.
5 Repeat step 3. Be sure to cover the entire
surface with the oil.
6 Repeat step 4. Allow the griddle to cool.
Wipe the entire surface of the griddle
using a heavy cloth. Apply a very thin layer
of vegetable oil. The griddle is now ready
to use.
NOTE: The griddle will take approximately
45 seconds to ignite. Unlike the surface
burners, which use electric igniters, the
griddle uses a glow bar for ignition. It takes
approximately 45 seconds for the glow bar
to reach temperature. Gas is only supplied
to the griddle once the glow bar reaches
temperature.
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents