Glass Cooktop Cleaning - GE Halogen/Radiant Cooktop Use And Care Manual

General
information
Normal
cleaning
Heavy,
burned
on soil
Clean the glass surface with cleaning cream
before you use the cooktop for the first time.
Also, clean the glass surface after each use.
This helps protect the top and makes clean-up
easier.
To clean the cooktop seal around the edge of
the glass, let a wet cloth rest on it for a few
minutes, then wipe clean. Use a mild detergent
if needed.
Do not use a knife or any sharp object on the
seal because it will cut or damage it.
Use only a recommended cleaning cream, such
as Cerama Brite or another cooktop cleaning
cream, on the glass cooktop.
To maintain and protect the surface of your
new glass cooktop follow these steps.
1. Before you use the cooktop for the first time,
clean it with cleaning cream. This helps
protect the top and makes clean-up easier.
1. Allow the cooktop to cool.
2. Apply a few drops of the cleaning cream to
the (cool) soiled area.
3. Using a damp paper towel, rub the cream
into the burned-on area. As with any burned-
on spill, this may require some effort.
4. Carefully scrape soil with razor scraper.
Hold scraper at a 30° angle against the
glass cooktop.
Be sure to use a new sharp razor scraper.
Do not use a dull or nicked blade.
5. If any soil remains, repeat the steps listed
above. For additional protection, after all
soil has been removed, polish the entire
surface with the cleaning cream.
6. Buff with a dry paper towel.

Glass Cooktop Cleaning

Halogen/Radiant Cooktop
2. Clean the surface with the cleaning cream
after each use.
3. Rub a few drops (less is better) of the
cleaning cream onto soiled area using a
damp paper towel. Buff with a dry paper
towel until all soil and cream are removed.
To order more cream and/or scrapers for
cleaning your glass cooktop, please call
our toll-free number:
National Parts Center
Cleaner
Scraper
Cream & scraper kit
800-626-2002
# WX10X300
# WX5X1614
# WB64X5027
15