Table of Contents
Advertisement
*B.
Checkup of compression pressure
Remove
eac~
glow plug and check cylinders, one by one, using
a compresslom pressure gauge.
If the preSsure differs
by
more than 2.5 kg/cm 2 (35.6 psi) between cylinders or if the
cylinder
pressure
is
less
than
26
kg/cm 2
(369.8
psi)
at
320 RPM for the 4 KW and at 280 RPM for
the 7.5 KW,
11 KW
and 12.5 KW correct it.
*C.
Fuel injection adjustment
In case of severe vibration during idling, have it repaired
at an authorized distributor or dealer which is equipped with
a pump tester.
*0.
Checkup of alternator and regulator
Regulate the voltage and current by use of a circuit tester.
*E.
Checkup of starter motor pinion and flywheel ring gear
Rectify the chamfered area that has been severely damaged by
use of an oil stone or some pencil grinder, and r-eplace the
part if it is damaged allover.
*F.
Tightening of bolts and nuts
7.7 KW ENCLOSED I N SOUND GUARD
24
Advertisement
Table of Contents
