GE Wine Vault Owner's Manual page 16

THE COOLING SYSTEM
Liquid Temperature Display
The cooling unit temperature display
indicates the liquid temperature in
the wine vault, rather than the air
temperature in the wine vault. This
ensures optimal wine temperature
preservation and allows for temperature
adjustment between 45°F and 85°F.
The liquid thermostat is equipped with a Self-Calibrating Probe, which contains a sensor
that communicates with the thermostat to ensure a consistent temperature.
To use the liquid thermostat:
Step 1: Fill a clean, empty 750 ml wine bottle 3/4 full with room-temperature tap water.
Step 2: Place the bottle probe securely into the bottle.
Step 3: Place the bottle with probe in a central location out of the direct path of the air
coming from the cooling unit (see recommended location) in your wine vault. Avoid
stretching the probe cord. It may become disconnected, resulting in the unit not
working properly.
Installing the probe in a bottle
Before the use of corks, jars were closed with a wad of leaves and mud.
16
WINE
ON
SET
TEMPERATURE
SET
Recommended location for probe