1. Manuals
  2. Brands
  3. Air Live Manuals
  4. Wireless Router
  5. WN-220R
  6. User manual

Air Live WN-220R User Manual

150mbps soho wireless router
Hide thumbs Also See for WN-220R:
Table of Contents

Advertisement

Quick Links

Download this manual
WN-220R
150Mbps SOHO Wireless Router
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WN-220R and is the answer not in the manual?

Questions and answers

Related Manuals for Air Live WN-220R

Summary of Contents for Air Live WN-220R

  • Page 1 WN-220R 150Mbps SOHO Wireless Router User’s Manual...
  • Page 2 OvisLink Corp. has made the best effort to ensure the accuracy of the information in this user’s guide. However, we are not liable for the inaccuracies or errors in this guide. Please use with caution. All information is subject to change without notice All Trademarks are properties of their respective holders. AirLive WN-220R User’s Manual...

  • Page 3: Fcc Statement

    IMPORTANT NOTE FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. AirLive WN-220R User’s Manual...

  • Page 4: Table Of Contents

    3.1 Login to Configure from Wizard ............15 3.2 System Status ..................19 3.3 Advanced ...................20 3.3.1 Basic Setting ..................20 3.3.2 Forwarding Rules ..................41 3.3.3 Security Settings ...................45 3.3.4 Advanced Settings ................59 3.3.5 Toolbox....................69 Appendix: FAQ and Troubleshooting ............73 AirLive WN-220R User’s Manual...

  • Page 5: Introduction

    Introduction 1.1 Overview AirLive WN-220R is the center of your home or office network, you can share a high–speed Internet connection with the flexibility, speed, security and simplicity! The WN-220R conforms to wireless 802.11b/g/n demand, and provides up to 150Mbps wireless speed. Its additional 4 Ethernet cable ports let the user connect your whole wired and wireless devices together.

  • Page 6: Support

    FAQ are frequently updated with latest information. In addition, you might find new firmware that either increase software functions or provide bug fixes for WN-220R. You can reach our on-line support center at the following link: http://www.airlive.com/support/support_2.jsp Since 2009, AirLive has added the “Newsletter Instant Support System” on our website.

  • Page 7: Packing List

    Channel Auto-selection, manually Security WEP, WPA, WPA-PSK, WPA2, WPA2-PSK WPS (WiFi Protected Setup) WMM (WiFi Multimedia) Functionality Ethernet WAN PPPoE, DHCP client, Static IP WAN Connection Auto-reconnect, dial-on-demand, manually One-to-Many NAT Virtual server, special application, DMZ AirLive WN-220R User’s Manual...
  • Page 8 Administration Web-based UI, remote login, backup/restore setting Performance NAT up to 90Mbps and Wireless up to70Mbps Environment & Certification Package WN-220R, DC 5V/1A power adapter, Quick Installation Information Guide Operation Temp. Temp.: 0~40°C, Humidity 10%~90% non-condensing Storage Temp. Temp.: -10~70°C, Humidity: 0~95% non-condensing...

  • Page 9: Hardware Configuration

    1. Introduction 1.6 Hardware Configuration 1.6.1 Front View 1.6.2 Rare View AirLive WN-220R User’s Manual...

  • Page 10: Led Indicator

    1. When Wireless is off, press this button (about 1 sec) to Enable enable "Wireless Radio". “Wireless” 2. When Wireless is On, press this button (about 1 sec) to and WPS execute WPS function. Press (6) sec to reset to default when the device works Reset simultaneously. AirLive WN-220R User’s Manual...

  • Page 11: Hardware Installation

    Router. Step 3. Power on Router: Connect the power adapter to the receptor on the back panel of your Router. Step 4. Complete the setup. When complete, the Status LED will flash. AirLive WN-220R User’s Manual...

  • Page 12: Getting Start

    CD into your CD drive and follow the description below for configuring your Router. Select the “Install Driver & Utility” on the menu. After the Utility shows up, please select Language then click “Next” for continues. AirLive WN-220R User’s Manual...
  • Page 13 You can select Wizard mode to run the setup step-by-step or run advanced mode to diagnose the network settings of the router. Advanced mode Setup Check the PC, Router or Internet icons for the Status of PC, Router or Internet. AirLive WN-220R User’s Manual...
  • Page 14 LAN port of the router 3. Make sure your network adapter has an IP address. Click “Next” for continues Wireless Setting Key in the SSID, Channel and Security options, and then click “Next” for continues. AirLive WN-220R User’s Manual...
  • Page 15 Click “Next” for continue. Click the button, “Let me select WAN service by myself”, to disable this function. Note: The Item supports to detect the Dynamic and PPPoE WAN Services only Example, the Dynamic WAN type is detected. AirLive WN-220R User’s Manual...
  • Page 16 2. Getting Start Manual select WAN Service In the manual mode, Click the any icons for continues. Summary of the settings and Next to “Reboot” Click “Next” for continue. Apply the Settings or Modify Click “Next” for continue. AirLive WN-220R User’s Manual...
  • Page 17 “Next” for continue. You can ignore the by select the “Ignore Test”. Setup Completed The EzSetup is finish; you can open the default web browser to configure advanced settings of the Router. Click “Finish” to complete the installation. AirLive WN-220R User’s Manual...

  • Page 18: Making Configuration

    3. Making Configuration Making Configuration WN-220R provides Web based configuration scheme that is, configuring by your Web browser, such as Mozilla Firefox or Internet Explorer. This approach can be adopted in any MS Windows, Macintosh or UNIX based platforms. AirLive WN-220R User’s Manual...

  • Page 19: Login To Configure From Wizard

    3. Making Configuration 3.1 Login to Configure from Wizard Type in the IP Address (http://192.168.1.254) Type password, the default is “airlive” and click ‘login’ button. Press “Wizard” for basic settings with simple way. Press “Next” to start wizard. AirLive WN-220R User’s Manual...
  • Page 20 3. Making Configuration Step 1: Set up your system password. Step 2: Select Wan Type. Auto Detecting or Setup Manually. AirLive WN-220R User’s Manual...
  • Page 21 3. Making Configuration Step 3: Setup the LAN IP and WAN Type. Step 4: Example: Please fill in PPPoE service information which is provided by your ISP. Step 5: Set up your Wireless. AirLive WN-220R User’s Manual...
  • Page 22 3. Making Configuration Set up your Authentication and Encryption. Step 6: Then click Apply Setting. And then the device will reboot. Step 7: Click Finish to complete it. AirLive WN-220R User’s Manual...

  • Page 23: System Status

    If the WAN port is assigned a dynamic IP, there may appear a “Renew” or “Release” button on the Sidenote column. You can click this button to renew or release IP manually. Statistics of Information: Enables you to monitor inbound and outbound packets AirLive WN-220R User’s Manual...

  • Page 24: Advanced

    3. Making Configuration 3.3 Advanced 3.3.1 Basic Setting Please Select “Advanced Setup” to Setup 3.3.1.1 Primary Setup – WAN Type, Virtual Computers AirLive WN-220R User’s Manual...
  • Page 25 LAN IP address of your product as their Default Gateway. You can change it if necessary. B. WAN Type: WAN connection type of your ISP. You can click Change button to choose a correct one from the following four options: AirLive WN-220R User’s Manual...
  • Page 26 Static IP Address: ISP assigns you a static IP address. WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS: enter the proper setting provided by your ISP. Dynamic IP Address: Obtain an IP address from ISP automatically. AirLive WN-220R User’s Manual...
  • Page 27 The amount of time of inactivity before disconnecting your PPPoE session. Set it to zero or enable Auto-reconnect to disable this feature. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The most common MTU value is 1492. AirLive WN-220R User’s Manual...
  • Page 28 First, please check your ISP assigned and Select Static IP Address or Dynamic IP Address. My IP Address and My Subnet Mask: The private IP address and subnet mask your ISP assigned to you. Server IP Address: The IP address of the PPTP server. AirLive WN-220R User’s Manual...
  • Page 29 The device will link up with ISP when the clients send outgoing packets. Auto-Reconnect(Always-on): The device will link with ISP until the connection is established. Manually: The device will not make the link until someone clicks the connect-button in the Status-page. AirLive WN-220R User’s Manual...
  • Page 30 The time of no activity to disconnect your PPTP session. Set it to zero or enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will connect to ISP automatically, after system is restarted or connection is dropped. AirLive WN-220R User’s Manual...
  • Page 31 Global IP: Enter the global IP address assigned by your ISP. Local IP: Enter the local IP address of your LAN PC corresponding to the global IP address. Enable: Check this item to enable the Virtual Computer feature. AirLive WN-220R User’s Manual...
  • Page 32 IP address pool. Domain Name: Optional, this informa tion will be passed to the client. Primary DNS/Secondary DNS: This feature allows you to assign DNS Servers Primary WINS/Secondary WINS: This feature allows you to assign WINS Servers AirLive WN-220R User’s Manual...
  • Page 33 PC, when DHCP server offers an IP to your PC. 3.3.1.3 DHCP Client List: 3.3.1.4 Wireless Setting Wireless settings allow you to set the wireless configuration items. Wireless : The user can en able or disable wireless function. AirLive WN-220R User’s Manual...
  • Page 34 The radio chann el number. The permissible channels depend on the Regulatory Domain. WPS (WiFi Protection Setup) WPS is WiFi Protection Setup which i s similar to WCN-NET and offers safe and easy way in Wireless Connection. AirLive WN-220R User’s Manual...
  • Page 35 Security: Select the data privacy algorithm you want. Enabling the security can protect your data while it is transferred from one station to another. There are several security types to use: AirLive WN-220R User’s Manual...
  • Page 36 3. Making Configuration WEP : When you e nable the 128 or 64 bit WEP key security, please select one WEP key to be used and input 26 or 10 hexadecimal (0, 1, 2…8, 9, A, B…F) digits. AirLive WN-220R User’s Manual...
  • Page 37 RADIUS Server IP address or the 80 2.1X server’s domain-name. RADIUS Shared Key Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server. AirLive WN-220R User’s Manual...
  • Page 38 If you select HEX, you have to fill in 64 hexadec imal (0, 1, 2…8, 9, A, B…F) digits If ASCII, the length of pre-share key is from 8 to 63. Fill in the key, Ex 12345678 AirLive WN-220R User’s Manual...
  • Page 39 RADIUS Server IP address or the 802.1X server’s domain-name. Select Encryption and RADIUS Shared Key Key value shared by the RADIUS server and th is router. This key value is consistent with the key value in the RADIUS server. AirLive WN-220R User’s Manual...
  • Page 40 If you select HEX, you have to fi ll in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII, the length of Pre-share key is from 8 to 63. Fill in the key, Ex 12345678 AirLive WN-220R User’s Manual...
  • Page 41 If ASCII, the length of Pre-share key is from 8 to 63. Key value shared by the RADIUS server and this rout er. This key value is consistent with the key value in the RADIUS server. AirLive WN-220R User’s Manual...
  • Page 42 If you select HEX, you have to f ill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII, the length of Pre-share key is from 8 to 63. 2. Fill in the key, Ex 12345678 AirLive WN-220R User’s Manual...
  • Page 43 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII, the length of Pre-share key is from 8 to 63. Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server. AirLive WN-220R User’s Manual...
  • Page 44 3. Making Configuration Wireless Client List .3.1.5 Change Password You can change Password here. We strongly recommend you to change the system password for security reason. AirLive WN-220R User’s Manual...

  • Page 45: Forwarding Rules

    This product’s NAT firewall filters out unrecognized packets to protect your Intranet, so all hosts behind this product are invisible to the outside world. If you wish, you can make some of them accessible by enabling the Virtual Server Mapping. AirLive WN-220R User’s Manual...
  • Page 46 This product provides some predefined settings Se lect your application and click Copy to add the predefined setting to your list. Note: At any given time, only one PC can use each Special Application tunnel. AirLive WN-220R User’s Manual...
  • Page 47 UpnP Setting The device also su pports this function. If the OS supports this function enable it, like Windows Xp. When the user gets IP from Device and will see icon as below: AirLive WN-220R User’s Manual...
  • Page 48 3.3.2.4 IPCamera PnP This function will automatically search your AirLive IP Camera that connects to the same LAN with the router. With this function, you can get the information of your IP camera faster and easier. AirLive WN-220R User’s Manual...

  • Page 49: Security Settings

    3. Making Configuration 3.3.3 Security Settings 3.3.3.1 Packet Filters AirLive WN-220R User’s Manual...
  • Page 50 To enable Inbound Packet Filter click the check box next to Enable in the Inbound Packet Filter field. Suppose you have SMTP Server (25), POP Server (110), Web Server (80), FTP Server (21), and News Server (119) defined in Virtual Server or DMZ Host. AirLive WN-220R User’s Manual...
  • Page 51 3. Making Configuration Example 1: (1.2.3.100-1.2.3.149) Remote hosts are allow to send mail (port 25), and browse the Internet (port 80) (1.2.3.10-1.2.3.20) Remote hosts can do everything (block nothing) Others are all blocked. AirLive WN-220R User’s Manual...
  • Page 52 FTP (port 21) behind Router Server. Others are all allowed. After Inbound Packet Filter setting is configured, click the save button. Outbound Filter: To enable Outbound Packet Filter click the check box next to Enable in the Outbound Packet Filter field. AirLive WN-220R User’s Manual...
  • Page 53 (192.168.12.100-192.168.12.149) Located hosts are only allowed to send mail (port 25), receive mail (port 110), and browse Internet (port 80); port 53 (DNS) is necessary to resolve the domain name. (192.168.12.10-192.168.12.20) Located hosts can do everything (block nothing) Others are all blocked. AirLive WN-220R User’s Manual...
  • Page 54 Router LAN IP is 192.168.12.254 (192.168.12.100 and 192.168.12.119) Located Hosts can do everything except read net news (port 119) and transfer files via FTP (port 21) Others are allowed After Outbound Packet Filter setting is configured, click the save button. AirLive WN-220R User’s Manual...
  • Page 55 A suffix of URL to be restricted. For example, ".com", "xxx.com". Action When someone is accessing the URL met the domain-suffix, what kind of action you want. Check drop to block the access. Check log to log these access. AirLive WN-220R User’s Manual...
  • Page 56 URL include “www.sina.com” will not be blocked, but the action will be record in log-file. URL include “www.baidu.com” will be blocked, but the action will not be record in log-file. IP address x.x.x.1~x.x.x.99 can access Internet without restriction. AirLive WN-220R User’s Manual...
  • Page 57 Checked if you want to enable URL Blocking. If any part of the Website's URL matches the pre-defined word, the connection will be blocked. For example, you can use pre-defined word "sex" to block all websites if their URLs contain pre-defined word "sex". AirLive WN-220R User’s Manual...
  • Page 58 Checked to enable each rule. In this example: URL include “msn” will be blocked, and the action will be record in log-file. URL include “sina” will be blocked, but the action will be record in log-file AirLive WN-220R User’s Manual...
  • Page 59 Choose "allow" or "deny" to allow or deny the clients, whose MAC addresses are not in the "Control table", to associate to the wireless LAN. AirLive WN-220R User’s Manual...
  • Page 60 “Copy to” button to copy the MAC address of the client you select to the ID selected in the “ID” Combobox. Previous page and Next Page To make this setup page simple and clear, we have divided the “Control table” into several pages. You can use these buttons to navigate to different pages. AirLive WN-220R User’s Manual...
  • Page 61 Control table (192.168.12.101), it will be denied to connect to this device. Clients 2 and 3 and other wired clients with a MAC address unspecified in the Control table are all allowed to connect to this device. But client 1 is denied to connect to this device. AirLive WN-220R User’s Manual...
  • Page 62 When this feature is enabled, the router will record the packet information pass through the router like IP address, port address, ACK, SEQ number and so on. And the router will check every incoming packet to detect if this packet is valid. AirLive WN-220R User’s Manual...

  • Page 63: Advanced Settings

    Port Scan, Ping of Death, Land Attack etc. VPN PPTP and IPSec Pass-Through Virtual Private Networking (VPN) is typically used for work-related networking. For VPN tunnels, the router supports IPSec Passthrough and PPTP Passthrough. 3.3.4 Advanced Settings AirLive WN-220R User’s Manual...
  • Page 64 Selected if you want to Set Date and Time manually. Set Date and Time manually Selected if you want to Set Date and Time manually. Function of Buttons Sync Now: Synchronize system time with network time server Daylight Saving: Set up where the location is. AirLive WN-220R User’s Manual...
  • Page 65 For example, "mail.your_url.com" or "192.168.1.100:26". Send E-mail alert to The recipients are the ones who will receive these logs. You can assign more than 1 recipient by using ';' or ',' to separate these email addresses. AirLive WN-220R User’s Manual...
  • Page 66 Next you can enter the appropriate information about your Dynamic DNS Server. You have to define: Provider Host Name Username/E-mail Password/Key You will get this information when you register an account on a Dynamic DNS server. AirLive WN-220R User’s Manual...
  • Page 67 IP 1, IP 2, IP 3, IP 4 Input your SNMP Management PC’s IP here. User has to configure to where this device should send SNMP Trap message. SNMP Version Please select proper SNMP Version that your SNMP Management software supports. AirLive WN-220R User’s Manual...
  • Page 68 Routing Information Protocol (RIP) will exchange information about destinations for computing routes throughout the network. Please select RIPv2 only if you have different subnet in your network. Otherwise, please select RIPv1 if you need this protocol. AirLive WN-220R User’s Manual...
  • Page 69 192.168.123.103 (a gateway), and if it sends Packets to 192.168.1.11 will go via 192.168.123.216 Each rule can be enabled or disabled individually. After routing table setting is configured, click the Save button. AirLive WN-220R User’s Manual...
  • Page 70 Press “Add New Rule” You can write a rule name and set which day and what time to schedule from “Start Time” to “End Time”. The following example configure “ftp time” as everyday 14:10 to 16:20 AirLive WN-220R User’s Manual...
  • Page 71 To edit the schedule rule. Delete To delete the schedule rule and the rule #of the rules behind the deleted one will decrease one automatically. Schedule Rule can be applied to Virtual server and Packet Filter, for example: AirLive WN-220R User’s Manual...
  • Page 72 3. Making Configuration Example1: Virtual Server – Apply Rule#1 (ftp time: everyday 14:20 to 16:30) AirLive WN-220R User’s Manual...

  • Page 73: Toolbox

    3. Making Configuration Example2: Packet Filter – Apply Rule#1 (ftp time: everyday 14:20 to 16:30). 3.3.5 Toolbox AirLive WN-220R User’s Manual...
  • Page 74 3. Making Configuration 3.3.5.1 View Log You can View system log by clicking the View Log button AirLive WN-220R User’s Manual...
  • Page 75 You can backup your settings by clicking the Backup Setting button and save it as a bin file. Once you want to restore these settings, please click Firmware Upgrade button and use the bin file you saved. AirLive WN-220R User’s Manual...
  • Page 76 Domain Name or IP Address for Test Allow you to configure an IP, and ping the device. You can ping a specific IP to test whether it is alive. AirLive WN-220R User’s Manual...

  • Page 77: Appendix: Faq And Troubleshooting

    If yes, please execute Browser, like Mozilla and key 192.168.123.254 in address. If not, please ipconfig /release, then ipconfig /renew. Whatever I setup, the pc can not get IP. Please check Status Led and refer to the Q2. AirLive WN-220R User’s Manual...
  • Page 78 Router and that the network cable from LAN port of router is plugged in Ethernet adapter. Then, please check which wan type you use. If you are not sure, please call the ISP. Then please go to this page to input the information ISP is assigned. AirLive WN-220R User’s Manual...

  • Page 79: How Do I Connect Router By Using Wireless

    Then click and will see the AP list that wireless client can be accessed: If the client can not access your wireless router, please refresh network list again. However, I still can not fine the device which SSID is “airlive”, please refer to Q3. AirLive WN-220R User’s Manual...
  • Page 80 2. When I use AES encryption of WPA-PSK to connect even if I input the correct pre-share key? A: First, you must check if the driver of wireless client supports AES encryption. Please refer to the below: AirLive WN-220R User’s Manual...
  • Page 81 3. When I use wireless to connect the router, but I find the signal is very low even if I am close to the router? A: Please check if the wireless client is normal, first. If yes, please send the unit to the seller and verify what the problem is. AirLive WN-220R User’s Manual...

Table of Contents