Air Live N450R Quick Start Manual

Recover procedure

Q: Firmware is crashed, how to recover N450R?

A: Please refer the followings to upgrade firmware again:

1. Unplug the power of your device.

2. Hold the hardware reset button while plugging the power.

After 15seconds, the Status LED will flash very fast, please release the reset button

3. Set your PC's IP address to "Obtain an IP address automatically". Connect the device's

LAN port to your PC.

Table of Contents

Need help?

Do you have a question about the N450R and is the answer not in the manual?

Page 1 Q: Firmware is crashed, how to recover N450R? A: Please refer the followings to upgrade firmware again: 1. Unplug the power of your device. 2. Hold the hardware reset button while plugging the power. After 15seconds, the Status LED will flash very fast, please release the reset button 3.
Page 2 You will see the emergency function page where you can upload your device’s firmware. 5. Click “Browse” button to select N450R’s firmware, and then click “Upgrade” button to upgrade firmware. 6. The procedure will take about 10 minutes to upgrade firmware.
Page 3 7. Please unplug and re-plug the power of your device manually. 8. Please wait a while until it boots up (about 1 minute). Then press the hardware reset button over 10 seconds to restore it to factory default setting. After resetting, the device’s IP is 192.168.1.254. 9.