Lexmark MS710 Quick Reference Manual page 15

2
Lift the blue handle, and then pull the toner cartridge out of the
printer.
3
Place the cartridge aside.
4
Lift the blue handle, and then pull the imaging unit out of the
printer.
1
5 Place the imaging unit aside on a flat, smooth surface.
Warning—Potential Damage: Do not expose the imaging unit to
direct light for more than 10 minutes. Extended exposure to
light may cause print quality problems.
Warning—Potential Damage: Do not touch the photoconductor
drum. Doing so may affect the print quality of future print jobs.
6
Pull the jammed paper gently to the right, and then remove it from
the printer.
Note: Make sure all paper fragments are removed.
2
Warning—Potential Damage: The jammed paper may be
covered with toner, which can stain garments and skin.
7 Install the imaging unit.
Note: Use the arrows on the side of the printer as a guide.
2
1
15
8
Insert the cartridge into the printer, and then push the blue handle
back into place.
Notes:
• Align the arrows on the guides of the toner cartridge with
the arrows in the printer.
• Make sure the cartridge is fully pushed in.
9
Close the multipurpose feeder door and the front cover.
2
1