Savin 1232 Scanner Reference page 102

Appendix
Message
[Insufficient memory. Close all applications, then re-
start scanning.]
[Insufficient memory. Reduce the scanning area.]
[No response from the scanner.]
[No User Code is registered. Consult your system
administrator.]
[Please call your service representative.]
8
[Please wait]
[Scanner is in use for other function. Please wait.]
[Scanner is in use by other user. Please wait.]
[Scanner is not available. Check the scanner connec-
tion status.]
[Scanner is not ready. Check the scanner and the op-
tions.]
[The name is already in use. Check the registered
names]
[The scanner power is off.]
98
Cause and Action
Close unnecessary applications running on
the computer.
• Reset the scan size.
• Lower the resolution.
• Set with no compression. ⇒ p.25 "Making
Scanner Settings"
Note
❒ The "The Relationship between the Reso-
lution and the Scanning Area" chart in
Help for halftone scanning might not al-
ways apply. Scanning cannot be per-
formed if large values are set for brightness
when using halftone or high resolution.
❒ When a paper misfeed occurs in the ma-
chine during printing, scanning cannot be
performed. In this case, after the misfed pa-
per has been removed, proceed with scan-
ning.
• Check whether the machine is connected to
the network correctly.
• The network is crowded. Reconnect after a
while.
Access is restricted with user codes. Consult
the system administrator of the machine.
An unrecoverable error has occurred in the
machine. Call your service representative.
The machine is in warming up. Please wait.
Automatic scanning will start soon.
A function of the machine other than the scan-
ner function is being used such as the copy
function. Wait for a while and reconnect.
Another user is using the machine to scan
originals. Wait for a while and reconnect.
Check whether the machine is connected to
the network correctly.
Check whether the ADF cover is closed.
You tried to register a name that is already in
use. Use another name.
• Check whether the main power switch of
the machine is turned on.
• Check whether the machine is connected to
the network correctly.