MAINTENANCE PREPARATIONS
SEAT
Seat Removal
1. Remove the seat bolts and collars.
2. Slide the seat back.
2
(1) SEAT BOLTS
Seat Installation
1. Slide the seat front prong onto the seat bracket and
the seat rear prongs onto the tabs by pushing down
and forward on the seat in each of these areas.
2. Install the collars and tighten the seat bolts.
TORQUE: 20 lbf ft (26 N m, 2.7 kgf m)
1
2
(2) SEAT
(1) SEAT FRONT PRONG
(3) SEAT REAR PRONGS
1
3
(2) SEAT BRACKET
(4) TABS
FUEL TANK
Fuel Tank Removal
1. Turn the fuel valve OFF.
2. Remove the seat (this page).
3. Remove the shroud A bolts and collars.
4. Remove the shroud B bolts, collars and shrouds.
4
(1) SHROUD A BOLTS/COLLARS
(2) SHROUD B BOLTS/COLLARS
(3) SHROUD
5. Pull the breather tube out of the steering stem nut.
6. Unhook and remove the fuel tank band.
7. Remove the fuel tank bolt.
(1) BREATHER TUBE
(2) FUEL TANK BAND
(3) FUEL TANK BOLT
17