Turning Your Hearing Instruments On And Off - Siemens Remote Control User Manual

Turning the remote control off
The remote control is only "on" when a button is pressed or
the volume is adjusted. Therefore the remote control does
not have a switch to turn it "off."
• To avoid accidentally pressing a button, keep the cap
of the remote control closed. A closed cap works like a
key lock.

Turning your hearing instruments on and off

Make sure the distance between your remote control and
hearing instrument does not exceed 40 inches (1 meter).
If you are wearing two hearing instruments, both instruments
will be turned on/off at the same time.
• Slide open the cap of the remote control to uncover
the control panel.
• Press the on/off button to turn your hearing instruments on.
• Press the on/off button to turn your hearing instruments off.
16
YOUR REMOTE CONTROL-ePEN
Adjusting the volume
• Slide open the cap of the remote control to uncover the
control panel.
• Turn the cap towards the "+" sign to increase the volume
of your hearing instruments.
• Turn the cap towards the "–" sign to decrease the volume
of your hearing instruments.
• When you turn the cap and release it, the volume changes
one step. The LED on the remote control blinks.
• When you turn the cap and hold it in the turned position,
the volume changes continuously. The LED on the remote
control blinks once and then stays on. You will hear an
acoustic signal in your hearing instruments when the
volume limit is reached.
Your Audiologist or Hearing Care Provider can activate/
deactivate the acoustic signals in your hearing instruments.
YOUR REMOTE CONTROL-ePEN
17