Audiovox VME 9125 NAV Owner's Manual page 52

- If needed, modify the default route planning
options. You can also change them later in
ROUTE SETTINGS.
The Initial Setup is now complete. The
Configuration wizard can be restarted later from
the Settings menu.
- After the initial setup is completed, the
Navigation menu appears:
Step 3 - Select a Destination:
You have many ways to select a destination.
Select by touching screen:
Address: Tap FIND and then FIND ADDRESS.
Travel to address entered using on-screen
keypad.
Point of Interest: Press FIND and then FIND
PLACES. Browse or search for point of interest.
History: Press FIND to see previous
destinations.
Favourites: Press FIND and then
FAVOURITES. Travel to favourite location.
Coordinates: Travel to a destination specified
by coordinates. Press FIND, MORE, and then
COORDINATE.
Place on Map: Press FIND and then FIND ON
MAP. Browse the map to choose the destination
and press the desired destination on the
touchscreen. Press SELECT and the system
will calculate a route to that destination.
Step 4 - Map/Guide Along Route
Proceed to the highlighted route and drive while
the iGo primo 2 software provides guidance to
your destination.
Step 5 - Arriving at Your Destination
When you are near your destination, the
destination is indicated by a checkered flag
symbol .
Exiting the navigation mode
Press ON/OFF icon in the Main Menu of the
navigation system to exit the navigation mode.
Latest Map Guarantee
To get the latest map data you have 30 days
from the first GPS positioning to download
the data free of charge from the website www.
naviextras.com.
To get the updated map data, you need to
download the Toolbox software from the
website www.naviextras.com and a micro USB
card reader.
Generate a backup of the navigation SD card
before you update the map data.
52