Reverb And Effects; Adding Reverb - Kawai CN32 Owner's Manual

7) REVERB AND EFFECTS

The CN32 digital piano allows performers to alter sounds by adding reverb and applying effects.
When selecting some internal sounds, the LED indicators for the EFFECTS or REVERB buttons may turn on
automatically. This is because certain internal sounds are prepared with an effect enabled as the default setting,
enhancing tonal quality and improving acoustic realism.

ADDING REVERB

Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert hall.
There are fi ve types of reverb available:
Reverb type
Room 1 Simulates the ambiance of a living room or small rehearsal room.
Room 2 Simulates a larger room than Room 1.
Stage Simulates the ambiance of a small hall or live stage.
Hall 1 Simulates the ambiance of a concert hall or theatre.
Hall 2 Simulates a larger hall or theatre than Hall 1.
Step 1
Press and hold the REVERB button, then press the
type.
2
Room 1 Room 2
Step 2
Press the REVERB button again to deactivate the reverb simulation.
The LED indicator for the REVERB button will turn off, indicating that the reverb simulation has been
deactivated.
Pressing the REVERB button once again will reactivate the reverb simulation, recalling the previously selected
reverb type.
Reverb settings are specifi c to each individual sound.
Any changes made to the reverb type or on/off status will remain until the power is turned off.
When the power is turned off, the reverb settings will return to the default settings.
Description
1
Press and hold the button
Stage Hall 1
or VALUE buttons to select the desired reverb
Hall 2
The currently selected reverb type will
be shown in the LED display.
Page
19
2