Applying Effects - Kawai CN32 Owner's Manual

Page
20

APPLYING EFFECTS

Effects alter the impression and feeling of the sounds.
There are seven types of effect available:
Effect type
Chorus
Delay 1
Delay 2
Delay 3
Tremolo
Rotary 1
Rotary 2
2
Step 1
Press and hold the EFFECTS button, then press the
type.
Chorus
Step 2
Press the EFFECTS button again to deactivate the effects.
The LED indicator for the EFFECTS button will turn off, indicating that the effects have been deactivated.
Pressing the EFFECTS button once again will reactivate the effects, recalling the previously selected effect type.
Simulates the rich character of a vocal choir or string ensemble, by layering a slightly detuned version
of the sound over the original to enrich it.
Adds an echo to the sound. There are three types of delay available, each with a different length of
delay between the echoes.
Adds vibrato to the sound.
Simulates the sound of a rotary speaker cabinet commonly used with electronic organs. Rotary 1 is a
normal rotary effect while and Rotary 2 adds distortion.
When either the Rotary 1 or Rotary 2 effect is selected, pressing the Soft pedal will alternate the speed of the rotary
speaker simulation between 'Slow' and 'Fast' effect modes.
2
1
Press and hold the button
Delay 1
Rotary 2
Effects settings are specifi c to each individual sound.
Any changes made to the effect type or on/off status will remain until the power is turned off.
When the power is turned off the effects settings will return to the default settings.
Description
or VALUE buttons to select the desired effect
Delay 2 Delay 3
The currently selected effect type will be shown
in the LED display.
Rotary 1 Tremolo