Effects/Reverb; Adding Reverb - Kawai CN 31 Owner's Manual

Hide thumbs Also See for CN 31:

Table of Contents

5) EFFECTS/REVERB

When selecting some preset sounds, the LED indicator for the EFFECTS or REVERB buttons may turn on

automatically. This is because certain preset sounds are prepared with an effect enabled as their default setting.

Adding an effect to the sound enhances tonal quality and improves acoustic realism. This CN piano features two

separate groups of effects. The ﬁ rst is reverb and the second contains chorus, delay, tremolo and rotary speaker.

Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert

hall. There are ﬁ ve types of reverb available: Room 1, Room 2, Stage, Hall 1 and Hall 2.

Step1

Press the REVERB button.

The LED indicator will turn on to indicate that reverb is in use. Press and hold the REVERB button to show the

currently selected reverb type in the display.

Step2

To change the reverb type, use the VALUE buttons while holding down the REVERB button.

To turn off the reverb, press the REVERB button again.

Press the REVERB button once again to turn the reverb back on. The previously selected reverb type will be

used.

Any changes made to the reverb type or on / off status will remain until the power is turned off.

When the power is turned off the reverb settings will return to the default settings.

Downloaded from

www.Manualslib.com

REVERB

Hold down the button.

manuals search engine

Room 1

Room 2

Page

Stage

Hall 1

Hall 2

Table of Contents