Using Effects - Kawai Concert Artis CA61 Owner's Manual

Page
20

Using EFFECTS

Seven different effect types are available as follows:
Chorus
Delay
Tremolo
Rotary
Step 1
Press the EFFECTS button to turn the effects on / off. The LED indicator will be turned on to indicate that
3
the effects are in use.
Press and hold the EFFECTS button and the currently selected effect type will be shown in the LCD
display.
To change the effect type, while holding the EFFECT button use the VALUE buttons to change the effect
type.
Release the EFFECTS button once the desired effect type is displayed.
The currently selected effect type is displayed while the EFFECTS
button is held down.
Effects will be turned off when the EFFECTS button is pressed and its
LED indicator turns off.
To turn the selected effect on, press the EFFECTS button once again
to turn its LED indicator on.
: Chorus is an effect that simulates the rich character of a vocal choir or string ensemble, by layering a
slightly detuned version of the sound over the original to enrich it.
: Adds echoes to the sound. There are three types of delay available (delay 1 - 3), each of which has a
different length of delay between the echoes.
: Adds vibrato to the sound.
: This effect simulates the sound of the Rotary Speaker cabinet commonly used with electronic organs.
Rotary 1 is a normal rotary effect and Rotary 2 adds distortion to the rotary effect.
The soft pedal is used to change the speed of the rotor between SLOW and FAST (page
Hold down the button.
8
).
Effect Type
= Chorus
Effect Type
= Delay 1
Effect Type
= Delay 2
Effect Type
= Delay 3
Effect Type
= Tremolo
Effect Type
= Rotary 1
Effect Type
= Rotary 2