Edit Menu Parameters (Midi); Program; Transmit - Kawai MP10 Owner's Manual

EDIT Menu parameters
1

Program

1. Program
This parameter determines which Program Change Number
will be transmitted when a SETUP is recalled. Select the
desired Program number for the sound you want to select on
the external MIDI device.
2

Transmit

Transmit parameters are SYSTEM parameters. These parameters are memorised automatically when exiting the
EDIT menu and do not need to be stored to each SETUP.
1. Send Program
This parameter determines whether or not a Program Change
Number will be transmitted when a SETUP is recalled.
To change sounds on external MIDI devices when calling a
SETUP, set this parameter to ON.
3. Send Volume
This parameter determines whether or not an initial MIDI
Volume message will be transmitted when a SETUP is recalled.
* Moving the volume fader(s) will still transmit volume messages even if
this parameter is set to OFF.
5. Transmit Recorder
This parameter determines whether or not data will be
transmitted when playing internal recorder songs.
(MIDI)
2. Bank MSB/LSB
: 1 - 128
VALUE
This parameter determines which MSB and LSB number will
be transmitted when a SETUP is recalled. The MIDI standard
allocates 128 storage spaces, however this number can be
expanded using an MSB and an LSB.
* Please refer to the owner's manual of the connected MIDI device for
further information.
2. Send Bank
/
ON OFF
This parameter determines whether or not Program Bank
Numbers (MSB, LSB) will be transmitted when a SETUP is
recalled.
If the external MIDI device requires a Bank Select message, set
this parameter to ON.
4. Send Knobs
/
ON OFF
This parameter determines whether or not control knob settings
will be transmitted (ON) or not (OFF) when a SETUP is recalled.
* Moving the control knobs will still transmit the values even if this
parameter is set to OFF.
/
ON OFF
: 0 - 127, 0 - 127
VALUE
/
ON OFF
/
ON OFF
45