Preset Menu - Sanyo CE28FWN6-B Instruction Manual

Preset menu

The preset menu can be used to tune new channels, to reorder
channels and their programme positions, and to make fine adjust-
ments to the tuning.
The preset menu is used for the following.
Program sort : To rearrange channel positions after Auto sort.
Auto sort: To automatically search, sort and store all channels.
Frequency : To manually search and add channels. To fine tune
existing channels.
Preset
Program sort
Auto sort
Program pos.
Program name
Frequency
Skip
Preset function can be disabled, see Hotel mode on page 8.
Program sort
1. Press Menu button and select Preset.
2. Select Program sort. Using 1, 2 buttons and 5 or 6
buttons. Select which channel you want to move eg. Programme
position 4. (highlighted yellow). Press (Green) Move button, the
programme position number turns green. Screen shows Move to
..... at the bottom.
Program sort
1 7
2 8
3 9
4 10
5 11
6 12
- - - - - - - - - - - - - - - - - - - - - - - - - -
3. Select programme position to move to eg. 2 . Press Green Move
button again to move.
4. To delete a channel. Select the Programme position. ie.17. Press
Red button. (highlights number red). Press Red button again to
delete. Programme position 17 is now deleted.
Exit menu by pressing MENU button repeatedly.
Auto sort
1. Press the MENU button and select Preset.
2. Select Auto sort by pressing 5 or 6 buttons. Press the F/OK
button to start automatically tuning, sorting and storing all avail-
able channels.
After completion Auto sort changes from Busy to OK?
3. Press the MENU button repeatedly to exit.
Note : Auto sort can be cancelled at any time by pressing any button
except for the F/OK button.
: You can change the order of the station selection, by using
the Program sort function.
6
MENU OPERA
MENU OPERA
Busy / OK?
6
Sky
631.25 MHz
On / Off
13
14
15
16
17
18
Move Delete
TION
TION
Tuning - Frequency (Manual)
1. Press the MENU button and select Preset.
2. Select Programme position using the 5 or 6 buttons and
select the programme position where you wish to preset a channel
using the 0-9, -/--, buttons or1, 2 buttons.
3. Select Programme name using the 5 or 6 buttons. Press the
1 button, the first character space turns yellow. Press the 5
or 6 buttons until the number or first letter you require appears
(0-9, A-Z, a-z, ?, !, -, +). Press the 1 button to select the
second character.
You can assign 7 characters of information. When finished press
the 1 button repeatedly until no character is highlighted.
4. Select Frequency by using the 5 or 6 button.
You can either...
a) Enter the frequency using the 0-9 buttons referring to the
channel table.
b) Press and hold the 1 or 2 buttons until the frequency
starts scanning (about 5 seconds), scanning will stop when a
channel is found.
c) Keep pressing to de-tune the frequency.
Repeat above until the correct channel is found.
5. Press the F/OK button to store the new frequency (it turns green).
6. Repeat for other programme positions if required.
Skip
Skip ON : In normal operation when the 5 or 6 button is
pressed this position will be skipped.
Skip OFF : Position is not skipped when 5 or 6 button is
pressed.
1. Press the MENU button select Preset - Program. pos.
2. Select a program position that you wish to Skip.
3. Select Skip by pressing the 6 button. Using 1 or 2
buttons select On / Off.
Press Menu button repeatedly to exit.
You can still view a programme position that has been skipped by
using the numeric buttons to select the programme position directly.