Splitting A Network Into Two Networks - ZyXEL Communications PLA-402 v3 User Manual

Chapter 7 Powerline Coaxial Network Setup Tutorial
Connect your new coaxial adapter and open the configuration utility as shown in
1
Section 7.0.5 on page
Type a Network Name that is different from the Network Name for your
2
existing network. Make sure you use the same new Network Name for all new
adapters you want to add to your new network.
Figure 42 Making a New Network with the New Adapter
After you have set up a new network, you are ready to connect each coaxial
3
adapter on your new network to devices, for example, a computer or a games
console.

7.0.6 Splitting a Network into Two Networks

This section shows you how to split your existing network into two networks. This
is useful if you want to set up a second powerline coaxial network in your home,
for example, in your study connecting a laptop and printer. See
65 for an example.
To set up your existing powerline coaxial network you had to set each coaxial
adapter with the same network name. To move some of these adapters to a new
network, you need to give them a new network name.
Connect a coaxial adapter to your computer and open the PLA-4xx Series
1
Configuration Utility (see
66
65. The screen shown below appears.
Section 7.0.3 on page
Figure 41 on page
62).
PLA-402 v3 User's Guide