Packet Data; Data Transfer; Transfer Contact List; Data Transfer With A Compatible Device - Nokia 3109 classic User Manual

S e t t i n g s
Paired devices — to search for any Bluetooth device in range. Select
•
device and Pair. Enter an agreed Bluetooth passcode of the device (up to 16 characters) to pair the device to your device. You
must only give this passcode when you connect to the device for the first time. Your device connects to the other device, and
you can start data transfer.
My phone's name — to set the device name for Bluetooth connections
•
If you are concerned about security, turn off the Bluetooth function, or set
Bluetooth communication from others whom you trust.

Packet data

General packet radio service (GPRS) is a network service that allows mobile devices to send and receive data over an internet
protocol (IP)-based network.
To define how to use the service, select
from the following options:
When needed — to set the packet data connection to established when an application needs it. The connection will be
•
closed when the application is terminated.
Always online — to set the device to automatically connect to a packet data network when you switch the device on.
•
You can connect the device using Bluetooth wireless technology or USB data cable connection to a compatible PC and use the
device as a modem to enable GPRS connectivity from the PC.
To define the settings for connections from your PC, select
settings Active access
>
access point, enter a name to change the access point settings, and select OK. Select
access point name (APN) to establish a connection to a network, and select OK.
Establish an internet connection by using your phone as a modem.
both on your PC and on your device, the PC settings are used.

Data transfer

Synchronize your calendar, contacts data, and notes with another compatible device (for example, a mobile device), a compatible
PC, or a remote internet server (network service).
Your device allows data transfer with a compatible PC or another compatible device when using the device without a SIM card.

Transfer contact list

To copy or synchronize data from your device, the name of the device and the settings must be in the list of transfer contacts.
If you receive data from another device (for example, a compatible mobile device), the corresponding transfer contact is
automatically added to the list, using the contact data from the other device.
in the list.
To add a new transfer contact to the list (for example, a mobile device), select
transfer Options Add contact
> >
To edit the copy and synchronize settings, select a contact from the transfer contact list and
To delete a transfer contact, select it from the transfer contact list and

Data transfer with a compatible device

For synchronization use Bluetooth wireless technology or a cable connection. The other device must be activated for receiving
data.
To start data transfer, select
than Server sync or PC sync.
According to the settings, the selected data is copied or synchronized.

Synchronize from a PC

To synchronize data from calendar, notes, and contacts, install the Nokia PC Suite software of your device on a compatible PC.
Use Bluetooth wireless technology or a USB data cable to connect your device with the PC and start the synchronization from
the PC.

Synchronize from a server

To use a remote internet server, subscribe to a synchronization service. For more information and the settings required for this
service, contact your service provider. You may receive the settings as a configuration message.
service," p. 7.
© 2007 Nokia. All rights reserved.
Menu Settings
>
point, and activate the access point you want to use. Select
Phone sync
>
Menu Settings Connectivity
> >
New to list any Bluetooth device in range. Select a
My phone's visibility
Connectivity
> >
Menu Settings
> >
See "Nokia PC Suite," p. 39.
Server sync
or Phone copy, and enter the settings according to the transfer type.
Options
Data transfer
>
26
to Hidden. Always accept only
Packet data Packet data connection
>
Connectivity Packet data
>
Edit active access point
Packet data access
If you have set the settings
and PC sync
Menu Settings Connectivity
> >
Options > Edit.
> Delete.
and the transfer contact from the list other
See "Configuration setting
and
Packet data
>
Alias for
>
point, enter the
are the original items
Data
>