W r i t e t e x t
You can search for a name or phone number that you have saved in Contacts.
key to call the number.
To access the list of dialed numbers, press the call key once in the standby mode. To call the number, select a number or name,
and press the call key.
Dialing shortcuts
Assign a phone number to one of the number keys, 2 to 9.
Call the number in one of the following ways:
Press a number key, then the call key.
OR
If
Speed dialling
is set to On, press and hold a number key until the call begins.
Further details are described in
Enhanced voice dialing
You can make a phone call by saying the name that is saved in the contact list of the device.
Voice commands are language-dependent. Set the
"Phone," p. 27.
Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely solely
upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection key or the volume down key. A short tone sounds, and
now
is displayed.
2. Speak the name of the contact you want to dial clearly. If the voice recognition is successful, a list with matches is shown.
The device plays the voice command of the first match on the list. If it is not the correct command, scroll to another entry.
Using voice commands to carry out a selected device function is similar to voice dialing.
Answer or reject a call
To answer an incoming call, press the call key. To end the call, press the end key.
To reject an incoming call, press the end key. To mute the ringing tone, select Silence.
To answer a waiting call during an active call (network service), press the call key. The first call is put on hold. To end the active
call, press the end key. You may also activate the
Options during a call
Many of the options that you can use during a call are network services. For availability, contact your service provider.
During a call, select
Options
Call options are
Mute
or Unmute, Contacts, Menu,
Network options are
Answer
Send DTMF
— to send tone strings
•
Swap
— to switch between the active call and the call on hold
•
Transfer
— to connect a call on hold to an active call and disconnect yourself
•
Conference
— to make a conference call
•
Private call
— to have a private discussion in a conference call
•
Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely
loud.
5.
Write text
Text modes
To enter text (for example, when writing messages) you can use traditional or predictive text input.
When you write text, press and hold
input, indicated by
. Not all languages are supported by predictive text input.
© 2007 Nokia. All rights reserved.
Speed
dialling.
See "Call," p. 27.
Voice recognition language
Call waiting
and from the following options:
Lock
or Reject,
Hold
or Unhold,
Options
to toggle between traditional text input, indicated by
See "Search for a contact," p. 22.
See "Dialing shortcuts," p. 23.
function.
See "Call," p. 27.
keypad, Record,
Voice
New
call,
Add to
conference,
13
before using voice dialing.
See "Voice commands," p. 25.
clarity,
Loudspeaker
or Handset.
End
call,
End all
calls, and the following:
, and predictive text
Press the call
See
Speak