Table of Contents
Advertisement
M
X
4
B
R
-
5
3
3
M
X
4
B
R
-
5
3
3
ME system disk to complete setup step.
4.
Win98/Win98 SE/Windows2000/Windows ME will finish the other installation procedure automatically, then you restart the
system.
Installing driver procedure on Microsoft Windows NT :
-----------------------------------------------------
When you are in Windows NT :
1.
In the Main group of NT, select the "Control Panel" icon.
2.
In the Control Panel window, choose the "Network" icon.
3.
In the Network Settings dialog box, choose the "Add Adapter" button. The Add Network Adapter dialog box appears.
4.
In the list of network cards, select "<other> Requires disk from manufacturer", and then press <Enter> button.
5.
Enter drive and pathname
[CD-ROM]:\Driver\LAN\RTL8100\Windows\WinNT4 (for NT 4.0) which is the path where the setup file OEMSETUP.INF is
located, and then choose the OK button.
6.
The screen will appear "Select Line Speed" dialog box which is provide by RTL8139.SYS driver. The default value is "auto" so
that the RTL8139 PCI Fast Ethernet adapter and its driver RTL8139.SYS will auto-detect the line speed, 10Mb or 100Mb,
while the RTL8139.SYS is loading. The other values, "10" or "100", are only used when you want to forced RTL8139 PCI Fast
Ethernet adapter to 10Mb or 100Mb.
7.
The screen will appear "Input EthernetID" dialog box which is provide by RTL8139.SYS driver. This option is only required
when you have more than one Realtek RTL8139 PCI Fast Ethernet adapters on this computer. Select "SKIP" if only one
adapter is installed on this computer.
65
O
n
l
i
n
e
M
a
n
u
a
l
O
n
l
i
n
e
M
a
n
u
a
l
Advertisement
Table of Contents
Troubleshooting
