AOpen MX4BS Easy Installation Manual
AOpen MX4BS Easy Installation Manual

AOpen MX4BS Easy Installation Manual

Hide thumbs Also See for MX4BS:

Advertisement

MODEM-CN Connector
2M/4Mbit Flash ROM BIOS
CD-IN Connector
Front Panel Audio Connector
32-bit PCI Expansion Slot x3
AGP 4x Expansion Slot
nd
2
USB Connector
JP14 CMOS Clear Jumper
FDD Connector
Front Panel Connector
Chassis Fan Connector
RJ-45 LAN Connector
SPP/EPP/ECP
Parallel Port
(Optional)
PS/2 Keyboard
USB Port
COM 1 Connector
Connector
MIDI/Game Port
COM2 Connector
PC99 Colored Back Panel
IrDA Connector
Low ESR Capacitors
System Fan Connector
4-pin 12V ATX Power Connector
478-pin CPU Socket with
Frequency/Voltage Auto-detection that
®
®
supports Intel
Pentium
4
1.3GHz~2.4GHz+ CPU
®
Intel
845 Chipset
168-pin DIMM Socket x3 supports
maximum memory size up to 3GB
CPU Fan
ATX Power Connector
ATA/33/66/100 IDE Connector x2
MIC-In
Line-In
Speaker-Out

Advertisement

Table of Contents
loading

Summary of Contents for AOpen MX4BS

  • Page 1 RJ-45 LAN Connector SPP/EPP/ECP MIDI/Game Port Parallel Port (Optional) PS/2 Keyboard USB Port COM 1 Connector COM2 Connector Connector MIC-In Line-In Speaker-Out MODEM-CN Connector PC99 Colored Back Panel 2M/4Mbit Flash ROM BIOS CD-IN Connector Front Panel Audio Connector IrDA Connector Low ESR Capacitors 32-bit PCI Expansion Slot x3 System Fan Connector...
  • Page 2: Jp14 Clear Cmos

    Press down the CPU socket lever and finish CPU installation. Note: If you do not match the CPU CPU Pin 1 and cut edge socket Pin 1 and CPU cut edge well, you may damage the CPU. CPU socket lever PART NO: 49.37P02.031 DOC. NO: MX4BS-EG-E0108B...
  • Page 3: Cpu Fan Installation

    This motherboard supports CPU VID function. The CPU core voltage will be automatically shipped; we strongly recommend you to install AOpen special designed CPU Fan as detected and the range is from 1.10V to 1.85V. It is not necessary to set CPU Core shown below on the retention module for better heat ventilation.
  • Page 4: Irda Connector

    6. IrDA Connector 8. Connecting IDE and Floppy Cables The IrDA connector can be configured to support wireless infrared module. This Connect 34-pin floppy cable and 40-pin IDE cable to floppy connector FDD and IDE connector supports HPSIR (115.2Kbps, 2 meters) and ASK-IR (56Kbps). connector.
  • Page 5 Click Next at the Update Device Driver Wizard. Select "Display a list of all the drivers..." and click Next. 10 9 Insert the AOpen Bonus CD and click Have Disk. Enter the appropriate drive for your disk media (for example: D:\) ,and click OK.
  • Page 6: Bios Upgrade

    15. AOpen Bonus Pack CD 17. BIOS Upgrade AOpen Easy Flash is a user-friendly flash method. The BIOS binary file and flash routine You can use the autorun menu of Bonus CD disc. Choose the utility and driver and select are combined together and you simply run a single file to complete the flash process.
  • Page 7: Part Number And Serial Number

    IDE cable. The problem should be caused by the Check if the system can IDE cables or HDD itself. reboot successfully. Re-install Windows 95, Windows 98 or Windows NT. MX4BS is the model name of motherboard; R1.00 is BIOS version...
  • Page 8 Dear Customer, Test Report: We recommend to choose board/card/device from the Thanks for choosing AOpen products. To provide the best and fastest service to compatibility test reports for assembling your PC. our customer is our first priority. However, we receive numerous emails and http://www.aopen.com.tw/tech/report/default.htm...

Table of Contents