Page 1
USB2.0 SPP/EPP/ECP Parallel Port LAN Port Ports PS/2 Mouse Line-In Connector (AOpen reserves the right to revise all the specifications and information Speaker Out contained in this document which is subject to change without notice.) MIC-In PS/2 Keyboard COM 1 Port VGA Port USB2.0 Ports...
1. JP14 Clear CMOS You can clear CMOS to restore system default setting. To clear the CMOS, follow the procedure below. 1. Turn off the system and unplug the AC power. 2. Remove ATX power cable from connector PWR2. Everything you need to boot this 3.
3. Installing Processor 5. Setting CPU Voltage & Frequency Setting CPU Core Voltage This socket supports Micro-FC-PGA2 package CPU, which is the latest CPU package This motherboard supports CPU VID function. The CPU core voltage will be automatically developed by Intel. Other forms of CPU package are impossible to be fitted in. detected.
6. Connecting Serial ATA Disk 8. S/PDIF Connector To connect a Serial ATA disk, you have to have a 7-pin serial ATA cable. Connect two ends S/PDIF (Sony/Philips Digital Interface) is a latest audio transfer file format that provides impressive of the serial ATA cable to the serial ATA header on the mainboard and the disk.
12. Front Audio Connector 10. JP28 Keyboard/Mouse Wakeup Jumper If the housing has been designed with an audio port on the front panel, you’ll be able to connect This motherboard provides PS2 keyboard / mouse wake-up function. You can use JP28 to onboard audio to front panel through this connector.
On the strength of Broadcom Gigabit LAN controller (MX4SG-L) or Broadcom 10/100Mbps After you finish jumper settings and connect correct cables, power on and enter LAN controller (MX4SG-N) on board, which is a highly integrated platform LAN connect the BIOS Setup. Press <Del> during POST (Power On Self Test). Choose "Load device, it provides gigabits or 10/100Mbps Ethernet for office and home use.
IDE cable. The problem should be caused by the Check if the system can IDE cables or HDD itself. reboot successfully. Re-install Windows 95, Windows 98 or Windows NT. MX4SG-N is model name of motherboard; R1.02 is BIOS version...
Page 8
Online Manual: To download manual, please log on and then select your preferred language. Under “Type” directory, choose “Manuals” to go to our manual database. You can also find the manual and EIG in AOpen Bonus Pack. http://club.aopen.com.tw/downloads Dear Customer, Thanks for choosing AOpen products.