Table of Contents
Advertisement
5. M
AINTENANCE
Product
Maintenance
Page 18 of 20
Dust build-up reduces light output performance and can cause overheating. This can
lead to reduction of the light source's life. To maintain optimum performance and
minimize wear, clean lighting products at least twice a month. However, usage and
environmental conditions could be contributing factors to increase the cleaning
frequency.
To clean the product, follow the instructions below:
·
Unplug the product from power.
·
Wait until the product is at room temperature.
·
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
·
Clean all transparent surfaces with a mild soap solution, ammonia-free glass
cleaner, or isopropyl alcohol.
·
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
·
Carefully wipe any dirt or grime to the outside edge of the transparent surface.
·
Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
COLORband PiX™ Mini User Manual Rev. 5
Advertisement
Table of Contents
