Table of Contents
Advertisement
CBB-6 Instructions
The CBB-6 works with the COLORband PiX™ Mini (shown below), COLORband PiX™, and most linear/strip lights.
Basic Assembly
To assemble the CBB-6 bracket:
1.
2.
3.
4.
The final assembly should appear similar to this:
Advanced Assembly Options
The CBB-6 is fully stackable. Use the included screws to attach another CBB-6 to the top
of the bracket for additional rows of lights.
Page 10 of 20
Unscrew the bracket adjustment knob on the light you wish to attach to the bracket.
Align the light to any of the small mounting holes on the CBB-6 (maximum 6 lights).
Reattach the bracket adjustment knob to the light.
Repeat up to a total of six times with a pair of CBB-6 brackets.
Do NOT connect more than two CBB-6 brackets vertically (for a maximum of 12 strip
lights).
Before mounting the CBB-6 onto any structure, ensure that the structure onto which
you are mounting the product on can support the total weight.
When rigging the product onto truss, you should use a mounting clamp with the
appropriate weight capacity. The CBB-6 bracket has multiple 13-mm holes which are
appropriate for this purpose.
CHAUVET® recommends the CLP-15 heavy-duty clamp (sold separately).
COLORband PiX™ Mini User Manual Rev. 5
Advertisement
Table of Contents
