Table of Contents
Advertisement
OSD 84
OSD 85
OSD 84
OSD 85
TOOLS
menu and press [OK]. The screen will show the message "OK
to Proceed" (OSD 84).
3. Press [OK] again and you will see the message "Ready to
Download" (OSD 85).
4. In the PC application set the Baud Rate to 115200 and start
the download procedure.
! Caution: The new download channels will delete the original
channels list. Please be careful before using it.
6.7. SMARTCARD AND SERIAL PORT
Note: This receiver includes support for dongles. Dongle
should be connected to serial port (RS232) of the receiver
and it must be fed by an external Power Supply.
In this option, you can access to the information about the con-
ditional access system or the information about serial don-
gle. For this:
1. At the option "Serial Port use" select "KEYFLY dongle" or
"Smartcard" (second option only will be active in receivers
with smartcard reader). (OSD 86)
2. Go to "Menu" option and confirm with "OK" (OSD 87). Follow
the steps showed on menu in order to access to the card
data or to the Dongle information.
3. If there is no card or Dongle (or they are incorrectly inserted),
an error alert will be shown on TV.
PAG.
36
Advertisement
Table of Contents
