Receiving Traffic Announcements - Pioneer AVH-8400BT Operation Manual

Detailed instructions
— iPod nano 6th generation
— iPod nano 5th generation
— iPod nano 4th generation
— iPod nano 3rd generation
— iPhone 4S
— iPhone 4
— iPhone 3GS
— iPhone 3G
— iPhone
The song information (tag) can be saved from
the broadcasting station to your iPod. The
songs will show up in a playlist called "Tagged
playlist" in iTunes the next time you sync your
iPod. Then you can directly buy the songs you
want from the iTunes Store.
The tagged songs and the song that you can
buy from the iTunes Store may be different.
Make sure to confirm the song before you
make the purchase.
If you cannot use this function normally, up-
date your iPod firmware.
Storing the tag information to
this unit
1 Tune in to the broadcast station.
2 Store the tag information to this unit.
Refer to Introduction of tuner operations on
page 15.
You can store the information if the Tag indica-
tor is displayed while the desired song is being
broadcast.
# While storing the tag data on this unit, Tag
flashes.
# The tag information for up to 50 songs can be
stored on this unit.
# Depending on the timing of when the tag in-
formation is stored, the tag information for the
song played before or after the currently playing
song may also be stored.
# If an SD is selected as the source while tag in-
formation is being stored to this unit, the tag in-
formation will not be transferred to the iPod.
3 When completed,
off and indicator is displayed.
Storing the tagged information
to your iPod
1
When your iPod is connected to this unit, your
iPod starts storing the tagged information
automatically.
# While transferring the tag, you cannot select
the SD source.
2
and the tagged information is stored on
your iPod.
Receiving traffic
announcements
Regardless of the source you are listening to,
you can receive traffic announcements auto-
matically with TA (traffic announcement
standby).
1
work's TP station.
2
Refer to Introduction of tuner operations on
page 15.
# If the TA function is turned on when you are
not tuned in to a TP or enhanced other network's
TP station, the
3
TA volume when a traffic announcement
begins.
The newly set volume is stored in the memory
and will be recalled for subsequent traffic an-
nouncements.
4
traffic announcement is being received.
Refer to Introduction of tuner operations on
page 15.
The tuner returns to the original source but re-
mains in the TA function standby mode until
indicator turns
the icon is touched again.
Connect your iPod.
When completed,
Tune in to a TP or enhanced other net-
indicator lights up.
Turn Traffic announcement on.
indicator lights up dimly.
Press +/– (VOLUME/VOL) to adjust the
Turn off the announcement while a
Section
indicator turns off
En
12
31