Setting The Video Signal - Pioneer AVH-2350DVD Owner's Manual

Menu operations
Selecting the video format
You can switch the video output format of V
OUT between NTSC and PAL.
1 Turn the unit off.
Refer to Basic operations on page 11.
2 Display the system menu.
Refer to Introduction of menu operations on
page 31.
3 Touch Video Output Format on the sys-
tem menu to select the video output for-
mat.
NTSC—PAL
Note
You can switch the video output format only for
the source from this unit.

Setting the video signal

When you connect this unit to an AV equip-
ment to this unit, select the suitable video sig-
nal setting.
! As this function is initially set to Auto, the
unit will automatically adjust the video sig-
nal setting.
However, the screen may turn black or
images may not be displayed properly
when Auto has been selected and the re-
ception is weak. Normally, select the appro-
priate video signal.
1 Display the system menu.
Refer to Introduction of menu operations on
page 31.
2 Touch Video Signal Setting on the func-
tion menu.
Video Signal Setting items are displayed.
! AV – Adjusts the AV video signal
! AUX – Adjusts the AUX video signal
! Camera – Adjusts the camera video signal
3 Touch c or d to select the desired
video signal appears.
Auto—PAL—NTSC—PAL-M—PAL-N—
SECAM
Section
10
41
En