Setting The Fm Tuning Step; Setting The Am Tuning Step - Pioneer AVH-2350DVD Owner's Manual

Menu operations
2 Display the system menu.
Refer to Introduction of menu operations on
page 31.
3 Touch Rear Speaker on the system
menu.
4 Touch Rear Speaker to switch the sub-
woofer output or full-range speaker.
5 Touch Preout to switch the subwoofer
or rear output.
Notes
! Even if you change this setting, there will be
no output unless you turn the subwoofer out-
put on (refer to Using subwoofer output on
page 33).
! If you change this setting, subwoofer output
in the audio menu will return to the factory
settings.

Setting the FM tuning step

! The tuning step remains at 50 kHz during
manual tuning.
1 Turn the unit off.
Refer to Basic operations on page 11.
2 Display the system menu.
Refer to Introduction of menu operations on
page 31.
3 Touch FM Step on the system menu to
select the FM tuning step.
Touching FM Step will switch the FM tuning
step between 50 kHz and 100 kHz. The se-
lected FM tuning step will appear.

Setting the AM tuning step

The AM tuning step can be switched between
9 kHz, the preset step, and 10 kHz. When using
the tuner in North, Central or South America,
reset the tuning step from 9 kHz (531 kHz to
1 602 kHz allowable) to 10 kHz (530 kHz to
1 640 kHz allowable).
1 Turn the unit off.
Refer to Basic operations on page 11.
2 Display the system menu.
Refer to Introduction of menu operations on
page 31.
3 Touch AM Step on the initial menu to
select the AM tuning step.
Touching AM Step will switch the AM tuning
step between 9 kHz and 10 kHz. The selected
AM tuning step will appear in the display.
Switching sound muting/
attenuation
Sound from this system is automatically
muted or attenuated when a signal from
equipment with a mute function is received.
! Sound from this system returns to normal
when the muting or attenuation is can-
celed.
1 Display the system menu.
Refer to Introduction of menu operations on
page 31.
2 Touch Mute/ATT until the desired set-
ting appears.
Touch Mute/ATT until the desired setting ap-
pears in the display.
! Mute – Muting
! ATT –20dB – Attenuation (ATT –20dB has a
stronger effect than ATT –10dB)
! ATT –10dB – Attenuation
! Off – Turns the sound muting/attenuation
off
Notes
! When Mute is displayed, the sound is turned
off and no audio adjustments can be made.
! When ATT is displayed, the sound is attenu-
ated and no other audio adjustments can be
made.
! Operation returns to normal when the phone
connection is ended.
Section
10
39
En